monomeblur

Watch the Wonders of Grids, as monome Makers Defend Minimal Design

As electronic musical instruments have evolved, it’s been surprisingly easy to point to specific designs that lead others. Creators do often reach the same cluster of ideas at about the same time. But the specifics of how those ideas catch on have very often coalesced around one iconic instrument. Bill Hemsath’s layout, with Bob Moog, for the Minimoog became the standard for monosynth keyboards with knobs. Roger Linn’s design for velocity-sensitive pads, and eventually the MPC 4×4 grid, became the standard for drum machines. And Brian Crabtree and Kelli Cain I think deserve credit for making the 8×8 grid the …

READ MORE →

How MIDI Works on the Linnstrument, or “Sometimes 14 Bits is Enough”

“How can an instrument be truly expressive if it only supports MIDI?” This seemed to be a frequently-asked question in our coverage of the upcoming Roger Linn Linnstrument. While OSC certainly has its merits, however, it is possible to get higher-resolution data via MIDI. You’re likely most familiar with MIDI’s standard 0-127 values, or the 7-bit data, as used in simple Control Change messages. A 14-bit message, by contrast, gives you over 16,000 levels of resolution – most for most tasks. The way the Linnstrument works is to send that higher-resolution data for pitch, via standard pitch bend messages. And …

READ MORE →

Watch a Haken Continuum Rival String Instruments for Expression

Enough of cheesy MIDI keyboards faking instruments. Yes, it looks embarrassing. Here’s something entirely different. On the subject of the Haken Continuum, a single, touch-sensitive, continuous-pitch instrumental controller, we can see in a video just how expressive it can be. The Continuum Fingerboard consists of a large, soft playing surface. Press in with your fingers, and three-dimensional sensing responds in pitch and timbre. The range is even greater than an 88-key keyboard in the full-sized model; an optional stand holds it steady (and would look at home on the deck of a Klingon warbird). The instrument, full of carefully-crafted custom …

READ MORE →
liineteaser-2

Video Teaser: Lemur on iPad About to Get Way More Awesome

Yeah, yeah, fake knobs and faders. A video teaser reveals what Lemur developer Liine is about to announce, and … whoa. Via Dr. Nick at Liine on Vine. As always, we’ll be on top of it. (Actually, not always. This time, we’ll be on top of it. Check in some time in the next 24 hours or so, I’m guessing.)

READ MORE →

The Augmented Guitar: In Final Hours of Crowd-Funding, Watch What Guitar Wing Can Do

Like superhero armor, the sleek Guitar Wing fits over the edge of your guitar – your existing, beloved guitar – and gives it badass bonus powers. The crowd-funded accessory finally brings control for digital instruments and effects to the fingertips of guitar and bass players, without forcing them to change instruments or give up their conventional techniques. Instead, Guitar Wing, via Bluetooth connection, provides pressure-sensitive pads, faders, buttons, switches, and (if you like) three-dimensional motion control right to the instrument. USB charged, rechargeable battery-powered, and with RGB color feedback and editing options, it’s ready to go anywhere and control anything. …

READ MORE →

Mood Ring: Put on an iRing, Wave Your Hands in front of iPhone, iPad for 3D Control [$25]

Talk to the hand, iPhone. Wave-your-hands 3D motion has seen various dedicated accessories – most recently, in the Hot Hand USB wireless and Leap Motion. Even Steinberg are in on the act. But this is definitely a new take. IK Multimedia have a plastic “iRing” you wear on your finger that gives you control of your iPhone, iPad, or iPod touch. The system uses the internal, front-facing camera on your iOS device to track the position of your hand. The dots on the rings are a marker that the camera follows through space. There are actually markers on both sides, …

READ MORE →

A DIY Multitouch Music Controller, monome-Style, Built From Scratch [Instructables, Arduino]

Complete with color LED display and interactive sensing, this clever DIY project from Amanda Ghassaei is the real deal: a multitouch table used for music, constructed from scratch. And step-by-step instructions on Instructables mean that you can try the same idea yourself. The 8×8 matrix and the notion of independent light-up LEDs, along with some of the firmware, come from the monome project (and the open arduinome clone). But here, that idea is extended to seamless touch sensing, measured by infrared. Multitouch Music Controller from Amanda Ghassaei on Vimeo.

READ MORE →

Wave Your Hands: 3-Axis Gesture Control in New Hot Hand USB Wireless

We’ve been seeing wave-your-hands-in-the-air gestural controls for music since the early part of the last century – thank you, Leon Theremin. But one of the more wholehearted efforts to make it useful has come from the makers of Hot Hand. Initially they peddled the idea to guitarists and bass players, who were already accustomed to adding additional expression to their hand via whammy bars and the like. The Hot Hand USB is the latest iteration, and now hopes to woo computer DJs and producers. The draw: plug-it-in, driver-free control of anything via MIDI, wirelessly. Whereas these sorts of things are …

READ MORE →

Down with Sequencers: The Age of Glass Finger-Drums Through Their Beats, Live [Videos]

For years, drummers have had to look sideways at drum machines — boxes with step sequencers blinking, out to replace them. With acts like The Age of Glass, tables are turned. The sounds are electronic (Access Virus, Machinedrum), but the playing is all live. Drummer Nick Froud plays all those parts without any sequencing, fingers blazing. The band has a self-released (Bandcamp) EP out this week, as well as some videos of them working away at the studio. The results are jammy, trippy, grooving good times. Great to see the studio work and recording, but this must be a lot …

READ MORE →

Miselu Uses Wireless, Magnets, Ribbon, Springs for Upcoming MIDI Keyboard [iOS/Desktop]

It is unintentionally turning into “crowd-funded experimental keyboard week” here on CDM. Miselu, the startup known for developing their own, custom Android-based hardware platform, now turn their attentions to iOS. Miselu’s Jeffrey Horton tells CDM they have suspended work on their existing hardware and “hope to resume android development when the time is right.” This comes how on the heels of NDVR’s crowd-funding campaign for a unique new keyboard, and just as we’re finishing our review of the crowd-funded (now shipping) QuNexus. (Note: NDVR now has a new IndieGogo crowd-funding link; there was an error in the way the first …

READ MORE →